Versions Compared

Old Version 150

changes.mady.by.user John Medalen

Saved on

compared with

New Version Current

changes.mady.by.user John Medalen

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • /help or ? - Display this page.  You are given the option to continue to DevWareX or to exit.  Note: if "?" is used, all other parameters are ignored.
  • /ini=filename or /ini="filename" - Specify the INI file to be used, overriding the one selected by DevWare if "Probe" is enabled.
  • /preset[=name] or /preset[="name"] - Run the optionally supplied specified preset. Note that the Startup Wizard dialog will be skipped whether or not the preset name is supplied.
  • /checksensor[=0 | 1 (default if not supplied)] - Disable | Force reading of sensor registers at startup. Disabled gives faster startup.
  • /camera=<number in decimal> - Force a specific camera id selection, in case more than one camera was detected.
  • /probe[=0 | 1 (default if not supplied)] - Disable | Force a "Probe". Note: ignored if SDAT filename is provided, and no "Probe" is performed if the parameter itself is not supplied.
  • /fullauto[=0 | 1 (default if not supplied)] - Disable | Force "Full Auto" option on the Startup Wizard. Note: enabled if parameter itself is not supplied.
  • /mono[=0 | 1 (default if not supplied)] - Disable | Force "Monochrome" option on the Startup Wizard. Note: disabled if parameter itself is not supplied.
  • /play[=0 | 1 (default if not supplied)] - Disable | Force "Play on Start" option on the Startup Wizard. Note: enabled if parameter itself is not supplied.
  • <sensor_sdat_file>.sdat - Specify the SDAT file to be used, overriding the one selected by DevWare if "Probe" is enabled.
  • /nul - start without HW needing to be attached. An SDAT file can be loaded, and Presets can be run as long as it doesn't expect register reads to provide valid data.
  • /detfar - detect FAR sensor on start.
  • /warnings=filename - Specify the warnings file name.
  • /restorepresets - 1 to restore the additional Presets windows from the last session, 0 to not restore the windows.
  • /suppressallwindows - Start DevWareX will all windows suppressed - only the image display is enabled.
  • /startfullscreen - Start DevWareX in full screen mode.
  • /dll=DLLname. Include a new Transport DLL. And alternative is to copy the DLL to the Plugins folder.
  • <sensor_sdat_file>.xsdat - if opening an .xsdat file with no directory path given and the file doesn't exist, the sensor_data directory will be searched.

...