...
This document describes the folder configuration and naming convention of the DevWareX USB drivers.
Note; Windows8 and Windows10 have has special installation steps that must be performed - make sure you review them!
Links can be found under "Driver Installation".
Demo2X Note
For Win10 support of Demo2X, use the driver instructions for "Windows7_64 / Demo2X".
You will most likely need to manually load the driver; use the Windows 7 USB Driver Guide and follow the instructions under "Manual Installation of the USB Driver".
Drivers Folder Configuration
...
XP_32 | XP_64 | Vista_32 | Vista_64 | Windows7_32 | Windows7_64 | Windows8_64 | Windows10_64 | |
Demo2X | cyusb | miusb2 | Usb32vi | Usb64vi | Usb32w7 | Usb64w7 | N/A | N/A |
Demo3 | cyusb3 | N/A | N/A | N/A | Apt32w7 | Apt64w7 | cyusb3 | cyusb3 |
AVStream | Avs32xp | N/A | N/A | N/A | Avs32w7 | Avs64w7 | N/A | N/A |
Driver Installation
For instructions on how to install a USB driver, refer the guide for your supported OS;
USB XP Driver User Guide, USB Windows7 Driver User Guide, Windows8 USB3 Driver Usage instructions, Windows10 USB3 Driver Usage instructions.
Refer to the AVStream Switch User Guide for instructions on how to enable a Demo2X board to be a UVC device.
Demo3 UVC support is available but not currently distributed. Please contact demokits@aptina.com for more informationinformation is available in the Flex Config User Guide.
XP and Windows7 Driver Naming Conventions
...
The naming convention is aaabbcc., where:*
aaa = <driver type>: AVS = AVStream, USB = Demo2X, APT = Demo3
...