...
- RAW files will play back in DevWare, but will need to be converted to AVI to be imported into other applications. You can use DevWare as a RAW to AVI file converter. Load the RAW file in DevWare and verify that the image looks correct. On the Video Capture dialog page select AVI recording format and turn off Capture to RAM. Click the Stop button on the Toolbar(See 2.2.2). Click the Record button on the Toolbar(See 2.2.2).
- The "Frame rate" listed in the info.txt file (RAW only) is the rate displayed on the Info Panel "FPS (Display)".
A specific frame rate can be set via Sensor Control / Video Record "Specify playback frame rate", or via the INI file using the STATE commands "VidCap Auto Play FPS" and "VidCap Play FPS". - “Specify playback frame rate”; DevWare video playback speed is not precise.
- MPEG-4 requires at least 20 frames to be recorded.
Single Button Image Capture
To enable the ability to perform a single-button image capture, do the following;- On the "Snapshot" page, enable "Camera Sound Effects". - On the "Image Save Options" - Use <F9> (for a "Grab") or <Ctrl-F9> (for a "Snapshot") to capture an image with a single button.
...