...
- /help or ? - Display this page. You are given the option to continue to DevWareX or to exit. Note: if "?" is used, all other parameters are ignored.
- /ini=filename or /ini="filename" - Specify the INI file to be used, overriding the one selected by DevWare if "Probe" is enabled.
- /preset[=name] or /preset[="name"] - Run the optionally supplied specified preset. Note that the Startup Wizard dialog will be skipped whether or not the preset name is supplied.
- /checksensor[=0 | 1 (default if not supplied)] - Disable | Force reading of sensor registers at startup. Disabled gives faster startup.
- /camera=<number in decimal> - Force a specific camera id selection, in case more than one camera was detected.
- /probe[=0 | 1 (default if not supplied)] - Disable | Force a "Probe". Note: ignored if SDAT filename is provided, and no "Probe" is performed if the parameter itself is not supplied.
- /fullauto[=0 | 1 (default if not supplied)] - Disable | Force "Full Auto" option on the Startup Wizard. Note: enabled if parameter itself is not supplied.
- /mono[=0 | 1 (default if not supplied)] - Disable | Force "Monochrome" option on the Startup Wizard. Note: disabled if parameter itself is not supplied.
- /play[=0 | 1 (default if not supplied)] - Disable | Force "Play on Start" option on the Startup Wizard. Note: enabled if parameter itself is not supplied.
- <sensor_sdat_file>.sdat - Specify the SDAT file to be used, overriding the one selected by DevWare if "Probe" is enabled.
- /nul - start without HW needing to be attached. An SDAT file can be loaded, and Presets can be run as long as it doesn't expect register reads to provide valid data.
- /detfar - detect FAR sensor on start.
- /warnings=filename - Specify the warnings file name.
- /suppressallwindows - Start DevWareX will all windows suppressed - only the image display is enabled.
- /startfullscreen - Start DevWareX in full screen mode.
- /dll=DLLname. Include a new Transport DLL. And alternative is to copy the DLL to the Plugins folder.
- <sensor_sdat_file>.xsdat - must include the full path of the .xsdat fileif opening an .xsdat file with no directory path given and the file doesn't exist, the sensor_data directory will be searched.
| Anchor |
|---|
| _Toc372623586 |
|---|
| _Toc372623586 |
|---|
|
2.2 Application Layout and Options
...