Pre-defined DevWare Presets
The following presets are used by DevWare and other Aptina Imaging software. The user may override the values in these presets, but the preset should not be deleted or renamed for proper software execution.
[Reset] |
Reset the sensor to its power-on state. Activated by the Reset button the DevWare toolbar. |
[Demo Initialization] |
The recommended register settings for the sensor in the demo environment. Activated by the Init button on the DevWare toolbar. |
[DevWare Initialization] |
Settings to initialize DevWare and the sensor for the demo environment. If this preset doesn't exist, Demo Initialization is used. |
[SensorDemo Initialization] |
Settings to initialize SensorDemo (DevWare /DEMO) and the sensor. If this preset doesn't exist, SensorDemo will fall back to DevWare Initialization or Demo Initialization. |
[Monochrome Initialization] |
Recommended register settings to use for the monochrome version of the sensor. |
[Viewfinder ON] |
Switch into Preview mode. Activated by the Preview button on the DevWare toolbar. |
[Viewfinder OFF] |
Switch out of Preview mode. Activated by the Preview button the DevWare toolbar. |
[Video Capture ON] |
Switch into Video Capture mode. Activated by the Record button on the DevWare toolbar unless Screen capture only (no register changes) is selected on Sensor Control, Video Capture dialog. |
[Video Capture OFF] |
Switch out of Video Capture mode. Activated when video capture ends, unless Screen capture only (no register changes) is selected on Sensor Control, Video Capture dialog. |
[Color Processing ON] |
Enable software color processing. Activated by the Auto button on the DevWare toolbar. |
[Color Processing OFF] |
Disable software color processing. Activated by the Auto button on the DevWare toolbar. |
[Camera 1] |
Select primary sensor on a two-sensor system. |
[Camera 2] |
Select secondary sensor on a two-sensor system. |
[Pre Still Capture] |
Activated before a still image capture, unless Current Image is selected on Sensor Control, Still Capture dialog. |
[Post Still Capture] |
Activated after a still image capture, unless Current Image is selected on Sensor Control, Still Capture dialog. |
[Data Types] |
Define data types for sensor registers and bitfields. Activated at DevWare startup. Deprecated since the .xsdat files contain this information. |