...

Overview

It also allows two video files to be loaded, as long as they are playable by DevWareXX.

Usage - Selecting Video or Sensors

The initial dialog allows you to select either two videos or Probe for sensors - make your choice and then select "Ok" to continue.

For Sensor Usage, go to "Usage - Sensors".  

For Video Usage, go to "Usage - Videos

Image Removed

This application allows two ON Semiconductor Demo cameras to This application allows two Sensors or two videos to be simultaneously displayed side-by-side.

It is useful for comparing differences in equal sized sensors, although dissimilar sensors may also be used together. Synchronous control of both images is provided for panning, zooming and play-state.
Videos can be looped or single-stepped, and can be of different lengths and types.  Video types supported include .raw, .avi, .wmv, and .mp4.

Side-by-Side can be launched via the desk-top shortcut, or via the Start menu.

Usage - Selection Sensor or Video

When you first start Side-By-Side, this dialog is displayed:

Image Added

Use the Radio buttons to select Live Sensors or Videos.

• For Sensors, select "OK" to continue.
• For Videos, use the "Browse..." buttons to select the videos and then select "OK" to continue.
  Note that the previously selected video will be automatically populated.

The next sections provide detailed Usage information for Sensors and Video.

Anchor
usagesensors usagesensors

Usage - Sensors

• Connect two ON Semiconductor Demo cameras to the system. Make sure the cameras are recognized and the drivers are installed.  You can do this with DevWareX.
• Launch SideBySide from the desktop shortcut.  The Side by Side Application Wizard will start.  Please select "Next".

...

• In this example we are using the AR0237CSas AR0237CS our 2nd camera.  We will select the DevWareX Initialization preset in this case.

...

• Next select Finish and then the application will launch with two instances of DevWareX and size the display windows evenly. The initial startup takes a little more time than normal, but requires no user interaction. Please be patient.

...

• Note; some sensors' initialization process will include a "Prompt" for interface or mode selection - you'll need to choose the appropriate setting and then select "OK".  For example;
   Image Added
• This example shows the two sensor windows (each a full version of DevWareX) with the control dialog at the bottom

...

• The control dialog at the bottom of the application is used to control both sensors together.  To control the sensors independently you can use the standard DevWareX controls for each camera.  They are hidden by default but can be opened from the toolbars.

...

Camera Control allows you to control  the cameras together.  You can "Play", "Pause" or "Stop" the cameras from streaming as well as toggle between preview and full resolution (assuming both cameras support preview modes).  You can also "grab" an image from both cameras simultaneously.   If you want to control each camera independently you can use the DevWareX controls.

Note: for "PlayRecord", you will be prompted to ensure that both DevWareX instances' video record settings have been properly configured before continuing.

...

• All DevWareX toolbars and dialogs are hidden by the application. They can be manually re-enabled if access to a specific control is needed.
• Selecting Quit from the SideBySide control bar will close all DevWareX instances, it is not necessary to close each one separately.
• If you have 2 sensors connected to USB3 cables but SideBySide indicates that 2 sensors are required, then unplug the missing sensor and restart SideBySide.

Anchor
usagevideo usagevideo

Usage - Video

After the video files are set and "OK" is selected from the Initialization dialog, Side-by-Side will launch two instances of DevWareX, and then the Side-by-Side control bar;

Image Added

There are only a few differences in the controls available for videos.

• There is no "Record" function.
• "Video Control" scroll bar is available to scroll through the two videos, or single-step via the left/right arrows.
  • Note that you must select the arrow character Image Added to enable scrolling and single-step.