Excerpt |
---|
DevWareX is a multi-platform implementation of DevWare, created with a more flexible GUI-generation tool. It has the same layout and controls as DevWare, but with additional features. |
...
Register Dialog; select which pages appear on the TabsAnchor RegPages RegPages - By use of a "Push-Pin" on the Page tab, you can select which Tabs will stay displayed.
- A maximum of 6 tabs can be pinned, with on tab being non-pinable.
Export SHIP LogAnchor ExportShipLog ExportShipLog - Enables the ability to filter the SHIP log by address and Read/Write - used to capture the registers settings for a given configuration.
- In the "Options" dialog, deselect "Allow Info Panel to Poll Registers".
- Enable "SHIP", and run the INI file preset with the configuration you want to record.
- Select "Export SHIP Log" - the settings are presented in "Wizard" dialog.
- Select the ship address of the sensor if you need sensor-only, or leave all of them to get Demo3 and SERDES.
- Deselect "Read", then select Next and then "Save to File ..." to output the results in as an INI file.
...
Rulers available for image displayAnchor Rulers Rulers - A ruler is available in the image display that corresponds to Pixel width/height.
- Enable/disable via "View / Rulers".
Video Playback; new controlsAnchor VideoPlayback VideoPlayback - To single-step a video, select "Pause". Each time you select "Pause" again, the video will single-step.
- Playback speed can be selected via the pull-down arrow on the "Play" button.
- Enter 0.0 to play back at the rate indicated in the video file.
- Maximum playback speed is determined by several factors, including image size and type and PC HW.
- Use the Scroll Bar to scroll through the video.
Video OverlayAnchor VideoOverlay VideoOverlay - Watch Dialog items that are overlaid on to the image are now saved on a per-frame basis during recording.
- A “*textOver.txt” file is saved along with the Video file.
- Enable Overlay display in the Watch Dialog during Video playback.