| Excerpt |
|---|
DevWareX is a multi-platform implementation of DevWare, created with a more flexible GUI-generation tool. It has the same layout and controls as DevWare, but with additional features. |
...
- Auto SW download - applies only to External DevWareX
- This feature allows for part identification even when the part-specific SDAT file isn't present.
- If the part is recognized and its SDAT file is missing, the user is prompted with a link to the SW installer location on the download Web site and given the choice of being taken there.
- Zoom stays centered
- When the image is zoomed-in past 100% and the "Image" dialog is enabled, the user is presented with a box that can be moved to navigate within the image.
- Zooming in and out then stays centered to this position, not the direct center as done in DevWare (from the upper-left corner).
- Zoom increment and specific values can be entered
- To sent the increment %, in the "Options" dialog use the "Zoom Incremental" (from 5% to 50%).
- To set a specific zoom value, use the pull-down from the Menu bar item "Zoom In" (from 2% to 1600%).
- To sent the increment %, in the "Options" dialog use the "Zoom Incremental" (from 5% to 50%).
- Zoom to Pixel
- The mouse scroll wheel can zoom in to the Pixel value level.
- Use the "Mouse Selection / Point" to select the desired Pixel, which results in the width/height location and the "cross-hair" of the Pixel.
- Use the "cross-hair" location to follow the Pixel as you zoom in to the Pixel value.
- Use the "Options" dialog to show the pixel values in Hex.
- Options Menu reorganized
- Sensor-specific items are now in Diagnostics/Sensor Advanced dialog.
...
- Register Dialog; select which pages appear on the Tabs
- By use of a "Push-Pin" on the Page tab, you can select which Tabs will stay displayed.
- A maximum of 6 tabs can be pinned, with on tab being non-pinable.
- Export SHIP Log
- Enables the ability to filter the SHIP log by address and Read/Write.
- Presented in "Wizard" dialog.
...