Page Comparison

...

Command	Definition
BITFIELD	Write a value to a bitfield of a register.
DATATYPE	Define the data type and optional valid range of a named register or bitfield.
DELAY	Delay a certain amount of time (in milliseconds) before continuing.
ERROR_IF	Output an error message and stop execution if a condition is met.
FAR1	Write a value to a sensor register on the first attached camera.
FAR2	Write a value to a sensor register on the second attached camera.
FIELD_WR	Write to a register or bitfield by name. Command works for any kind of register, variable or SFR.
ICON	Define the icon for a User Toolbar button.
IF_FIELD	Similar to LOAD, but conditioned on the value of a register.
IF_REG	Similar to LOAD, but conditioned on the value of a register.
IF_SERIAL	Similar to IF_REG, but can access any device on the SHiP bus.
IMAGE	Set software to expect the given image size and type. Command does not change sensor mode.
LOAD	Load a preset from an ini file.
LOAD_PROM	Load a preset from an EEPROM.
LOG	Add a text string to the Log window.
MEM	Write a value to an SOC RAM location.
MEM8	Write a value to an 8-bit SOC RAM location.
MEM32	Write a value to a 32-bit SOC RAM location.
MENUITEM	Define sub-menu items for a User Toolbar button.
OPTION	Set a DevWare Option variable.
POLL_FIELD	Poll a register. Similar to DELAY, but conditioned on the value of a register.
POLL_REG	Poll a register. Similar to DELAY, but conditioned on the value of a register.
POLL_VAR	Poll a variable. Similar to DELAY, but conditioned on the value of a variable.
PROMPT	Give the user a multiple-choice dialog, or show a message.
PYTHON	Invoke a one-line Python statement.
REG	Write a value to a register.
83269893 REG_BURST	Write a sequence of register values in one bus transaction.
83269893 SAVE_IMAGE	Write image data to files.
83269893 SAVE_REGS	Write register values to a file.
83269893 SENSOR_BASE	Set or detect the sensor SHiP base address.
83269893 SERIAL_REG	Low-level write to Two-Wire Serial Interface register.
83269893 SFR	Write a value to a special function register, on certain sensors.
83269893 SFR8	Write a value to an 8-bit special function register, on certain sensors.
83269893 SHORTCUT	Define a keyboard shortcut for a User Toolbar button.
83269893 STATE	Set a variable within the software, not on the sensor.
83269893 TOOLTIP	Define a tooltip for a User Toolbar button.
83269893 VAR	Write a value to a firmware variable.
83269893 VAR32	Write a value to a 32-bit firmware variable.
83269893 VAR8	Write a value to an 8-bit firmware variable.
83269893 XMCLK	Set the XMCLK (sensor external clock) frequency.

...

Anchor

	STATE
	STATE

STATE = <state>, <value> //<comment>

Set a variable within the software, not on the sensor. See State STATE Variables for a list of supported states.

Example: Set Auto Exposure Target to 50
STATE= Auto Exposure Target, 50

...

Versions Compared

Old Version 36

New Version 37

Key