It is assumed that the reader has working knowledge of how to program the product being used, and its the product's features.
| Table of Contents |
|---|
...
The FlashtoolGUI application provides the user with the ability to create, modify, and write flash content Aptina Imaging System-on-Chip (SOC) ON Semiconductor Imaging devices that support SPI flash and EEPROM memory.
When you start FlashTool, if a device is attached , it will detect it and then load the appropriate SDAT file(s).
If no device is attached, you'll be able to manually load the appropriate SDAT file(s).
...
It also presents some operational notes .If about the 2 other tabs - "Configuration" and "Generate Image and Program".
For example, if you want to program an existing binary file, simply select the "Generate Image and Program" tab.
...
Sensor Data File (.xsdat or .sdat)
...
The Configuration tab is where you load the configuration file (.fcfg), or FCFG file. It is also enables navigation to the various Table types via the "Select Table" Radio buttons.
1.2.1 Configuration File
...
You can optionally add comments in the "Record Comments" section, but you add the record data in the "Record parameters" section.
Note: selecting "Command" record type opens an additional pull-down dialog for you to select the actual command.
1.2.3.3 Insert from Fcfg
...