...
Adds extra Blank Records in the Table of Contents, Init Table, and all COMMAND_SEQ_V1. This allows extensibility after initial programming, but is a change from the original format. Please refer to Encoding Specification Section 6.4 for details. The mode status is displayed on the main dialog screen (top-center).If this mode is enabled, a warning dialog will appear when the "Generate Flash Image" button is pressed, with the option to cancel the operation.Note: this mode is not applied to the configuration file.
1.3.2.3 Memory Map
Enabling this will create a text file that contains a map of where in binary each item is located. The file will stored in the same location as the binary image.
1.3.2.4 Set Memory Map
This dialog allows you to specify specific locations for each of the Tables and TOC (Table of Contents).
The "Help" button displays the binary image format.
1.3.2.5 Generate Binary Image
Select to generate a binary image (.bin) of the flash memory configuration. This image can be written into flash using this or other tools. Note; if Spaces Mode is enabled (see "Global Settings/Enable Spaces Mode"), a warning dialog will appear when the "Generate Flash Image" button is pressed, with the option to cancel the operation
1.3.3 Program Memory Device
...