...
| Most Products | AP0101 / AP0201/2 OnlyAOnly |
|---|---|
| INIT_TABLE | INIT_TABLE |
| CALIBRATION_INIT_TABLE | CALIBRATION_INIT_TABLE |
| PATCH_INIT_TABLE | PATCH_INIT_TABLE |
| DEWARP_INIT_TABLE or STE_INIT_TABLE | PATCH_TOC |
| OVERLAY_INIT_TABLE | COMMAND_SEQ_TOC |
| PATCH_TOC | |
| OVERLAY_BITMAP_TOC | |
| OVERLAY_STRING_TOC | |
| COMMAND_SEQ_TOC | |
| DEWARP_CONFIG_TOC or STE_CONFIG_TOC | |
| OVERLAY_COLORLUT_TOC | |
| OVERLAY_USERCHAR_TOC |
...
1.2.2
...
Tables
The Table of Contents Setting page allows the user to specify assets which have been created externally, and need to be included in the flash image.
The types of assets that can be included will depend on the features of sensor you are using, and may be different from those depicted in these images.
Rel. Path - Indicates whether user uses the relative path of the file that is referenced or an absolute path. If checked, the reference point of the file is the location of the tool.
Add New - Add a new firmware patch to the table of contents. You are first required to provide the patch binary file (.bin), then the patch information file (.info). The information file must correspond to the patch binary file.
Add Blank - Add a blank entry into the patch table of contents. A blank entry can be overwritten with a valid patch address. This is useful for extending the original flash image with additional patches.
Remove - Removes the currently selected entry from the table.
...
"Select Table" section is used to select the Table that you want to modify.
Note: Distortion and Graphics Overlay do not apply to AP0101 and AP0201/2 products.
- Global; contains register and variable settings that don't apply to the other specific areas (such as Patch or Calibration).
- Patch; contains patches (some recommended, some optional on per-feature basis) to be applied.
- Calibration; contains settings that are specific to calibration.
- Distortion Correct; settings for devices that support distortion correction (also know as "Dewarp").
- Graphics Overlay; settings to define overlays available to the product.
- Command Sequence; settings where specific Host Commands can be defined.Vendor Specific; allows definition of custom records types.
1.2.2 General Table Controls
| Anchor | ||||
|---|---|---|---|---|
|
In this table specify the list of firmware patches that need to be included in the flash image. Please note that when you locate a .bin file which includes the patch, the tool will also look for a file with a similar name ending with the extension .info. The .info file has to be the correct information file for the intended patch file.
...