...
Open Start Menu ->All Programs -> Aptina Imaging -> Tools -> Flash Tool
2) Load the Sensor Data file(s) - Sensor Info Tab
If you have a sensor attached via USB: the Sensor Data file will load automatically.
If you DO NOT have a sensor attached: manually load a Sensor Data File by clicking “Load” and selecting the .xsdat file for your sensor. The default location is C:\Aptina Imaging\sensor_data. If you are using an AP10XXX AP010x or AP020x sensor, you will have an option to also load a Superset/Far Sensor, default location: C:\Aptina Imaging\sensor_data\configurations
3) Load a Configuration File - Configuration Tab
Click the “Load” button to the right of the Configuration file field, open the folder for your sensor and select a sample configuration file (FCFG file). The default location is C:\Aptina Imaging\flashtool\YOUR_SENSOR
4) Select the Table of Content Setting tab
.
Depending on the particular Configuration file you have loaded, the various "Table" contents of this tab will vary and may be empty. See Help within Flash Tool for more details on using this tab.
...
6) Click through the initialization tables
...