Page Comparison

Anchor
ICON ICON

ICON = <icon name> [,CHECKED|RADIO= <register name>[:<bitfieldname><bitfield name>]|STATE:<STATE variable> <condition>] [,ENABLED= <register name>[:<bitfield namename>|:<mask>]|STATE:<STATE variable> <condition>]  //<comment>

Otherwise the name specifies a built-in icon image. The built-in images are different colored shapes. Specify the shape and color. The shapes are circle, square, triangle and star. The colors are black, brown, red, orange, yellow, green, blue, violet, gray and white.

Example: Use a built-in icon image.
ICON= green square.

Optionally you can define the 'checked' (pressed-in) and enabled (not grayed out) state for the button, based on the value of a register, bitfield or DevWare STATE variable. The <condition> can be ==, !=, <, >, <=, or >= followed by a numerical constant. Use the RADIO keyword for a group of mutually exclusive buttons. Use the CHECKED keyword for independent buttons.

Example: Load icon from file antishake.bmp, and declare that the button should be pressed-in when SEQ_STATE_CFG_2_AS equals 1 and not pressed otherwise.
ICON= antishake.bmp, CHECKED= SEQ_STATE_CFG_2_AS == 1

Example: Load icon from file Zoom1.bmp, and declare that the button should be pressed-in when the DevWare STATE variable Display Zoom Percent equals 100.
ICON= Zoom1.bmp, CHECKED= STATE:Display Zoom Percent == 100

See also the MENUITEM= and TOOLTIP= commands.

Anchor
MENUITEM MENUITEM

MENUITEM = "<menu text>", LOAD= <preset> [, ICON= <icon name>] [,CHECKED|RADIO= <register name>[:<bitfieldname><bitfield name>|:<mask>]|STATE:<STATE variable> <condition>] [,ENABLED= <register name>[:<bitfield namename>|:<mask>]|STATE:<STATE variable> <condition>][,SHORTCUT=<key combination>]  //<comment>

Defines a drop-down menu item for a User Toolbar button in DevWare. Only takes effect if the preset name begins with "Toolbar:" or "Toolbar2:". This command causes the toolbar button behavior to change to a drop-down menu action.

The ICON=, CHECKED=, RADIO= and ENABLED= attributes work as in the ICON= command, except they apply only to the menu item, not the toolbar button. The icon file must be a .bmp (32-bpp, R-G-B-alpha) file, 13x13 pixels for the normal Windows text size. SHORTCUT= attribute works like the SHORTCUT= command, but applies only to this menu item.

If ICON= is used then CHECKED= or RADIO= will may have no visible effect depending on OS or GUI library.

The maximum number of menu items on a single toolbar button is 25.

Example: Group multiple presets under one button, with a separator between Parallel and HiSPi.
[Toolbar: 1280x720]
MENUITEM= "Parallel 1280x720 36.19fps", LOAD= Parallel 1280x720 36.19fps XBin2YBin2_BinSum
MENUITEM= "Parallel 1280x720 51.69fps", LOAD= Parallel 1280x720 51.69fps XBin2YSkip2_ColSum2
MENUITEM="-"
MENUITEM= "HiSPi 1280x720 51.69fps", LOAD= HiSPi 1280x720 51.69fps XBin2YSkip2_ColSum2

Example: Image Orientation control for a SMIA sensor using radio button icons
[Toolbar: Orientation]
MENUITEM= "Normal", LOAD= Normal, RADIO= IMAGE_ORIENTATION==0
MENUITEM= "Mirror", LOAD= Horiz Mirror, RADIO= IMAGE_ORIENTATION==1
MENUITEM= "Flip", LOAD= Vertical Flip, RADIO= IMAGE_ORIENTATION==2
MENUITEM= "Rotate 180", LOAD= Rotate 180, RADIO= IMAGE_ORIENTATION==3
[Normal]
FIELD_WR= IMAGE_ORIENTATION, 0
[Horiz Mirror]
FIELD_WR= IMAGE_ORIENTATION, 1
[Vertical Flip]
FIELD_WR= IMAGE_ORIENTATION, 2
[Rotate 180]
FIELD_WR= IMAGE_ORIENTATION, 3

Note: if "LOAD=" is not supplied, then that MENUITEM will be disabled but still displayed. 
To to provide visual separators between MENUITEM sections, use MENUITEM= "-".

See also the ICON=, SHORTCUT= and TOOLTIP= commands.