This document describes the sample code that is included in the SDK and can be found in C:\Aptina Imaging\samples.

They use VS2015, and Qt 5.9.4 where applicable.  Also, for some samples VS2008/VS2010/VS2012/VS2013 solutions files are available.

NOTE: for Qt applications, you'll need to install Qt's VS2015 plugin and then in VS2015 set the following "Qt Versions" via the "Qt VS Tools" menu;

• Name "msvc2015_64" and path to 64-bit Qt (e.g C:\Qt\Qt5.9.4\5.9.4\msvc2015_64)
• Name "msvc2015" and path to 32-bit Qt (e.g. C:\Qt\Qt5.9.4\5.9.4\msvc2015)

Most pre-built executables are in C:\Aptina Imaging.

Each application is noted as being Command Line-based, GUI-based, or a plug-in.

...

Also, the Python script "create_new_dlg.py" can be used to make a copy of the BlankQtDlg source into the DevWare directory, while making all necessary file name changes and string substitutions to create a new plug-in project.

NOTE: for Qt applications, ensure that you have a System Variable of "QTDIR" set to the location of your Qt installation files; for example, C:\Qt\Qt5.4.0\5.4\msvc2012_opengl

Csharp_ApBase_COM_Sample

Csharp_ApBaseCOM.exe is a Command Line based C# sample of using ApBase's COM interface built using Visual Studio C#. The sample performs the following actions:
1. Starts ApBase_COM and then displays the sensor name found.
2. Loads the default initialization preset.
3. Sets up the capture/save parameters.
4. Grab the frame and saves it, and verifies there were no errors.
5. Exits ApBase_COM.

...

• ColorPipe.py shows calling the ApBase API to do image processing as in DevWareX, on a RAW file.
• convert_12bit_to_8 or 10bit.py converts 12 bit raw file of onsemi sensors to 8 bit and 10 bit raw files.
• LiveStream_OpenCV.py shows calling the ApBase API from DevSuite and OpenCV to stream a live image.
• NoiseMeasurement.py uses shows calling the ApBase API from DevSuite to do noise measurement for raw files and write the results to text files.
• RenderRawVideoToWmv.py shows calling the ApBase API from DevSuite to do a video conversion from RAW image.
• RGBIRVideoCapture.py uses shows calling the ApBase API from DevSuite to creates a video file from an RGB-IR sensor.
• SimpleCapture.py shows calling ApBase API from DevSuite to do an image capture.
• SimpleCapture_Ubuntu.py same as SimpleCapture.py except coded for Ubuntu._
• SimpleCaptureAvi.py shows calling ApBase API from DevSuite to capture 100 frames and create an AVI video file.
• SimpleCaptureNumpy.py shows calling ApBase API from DevSuite to capture an image and then conversion in to a Numpy array.

RawToRGB

RawToRGB is a Command Line based Visual Studio C++ application that converts a raw image to RGB using ApBase.

...

Simple is a GUI-based QT Visual Studio C++ ApBase application that can display image output for all onsemi sensors. It has a very simple demosaic algorithm in order to display output for Bayer only parts. It also includes examples of how to read and write registers.
Note that the application expects the width and height to match the SDAT's values of "Width" and "Height".

NOTE: for Qt applications, ensure that you have a System Variable of "QTDIR" set to the location of your Qt installation files; for example, C:\Qt\Qt5.4.0\5.4\msvc2012_opengl

TransportDLL

TransportDLL is a sample Visual Studio C++ transport DLL. A transport DLL allows a user to use non-onsemi Hardware to run with Devware or any other MIDLIB application. For more information on creating a transportDLL please refer to the "Transport DLL Development Guide"

...