This method can be used to set specific DevWareX dialog controls that are not available via STATE commands.
In a regular (non-Python) preset:
PYTHON= apbase.Camera().LSB_ALIGNED=1
In a Python preset:
[python: enable LSB aligned]
apbase.Camera().LSB_ALIGNED=0
ERROR_CHECK_MODE REG_ADDR_SIZE REG_DATA_SIZE USE_REG_CACHE SW_UNSWIZZLE_MODE UNSWIZZLE_MODE SW_UNSWIZZLE_DEFAULT DATA_IS_SWIZZLED ERROR_LOG_TYPE SPOOF_SIZE SPOOF_SUPPORTED HW_BUFFERING OUTPUT_CLOCK_FREQ ALLOW_FAR_ACCESS PIXCLK_POLARITY SENSOR_POWER SENSOR_RESET SHIP_SPEED DIRECT_VAR_ACCESS XDMA_LOGICAL XDMA_PHY_A15 XDMA_PHY_REGION XDMA_ADV_BASE HW_FRAME_COUNT HW_FRAME_COUNT_MASK COMPRESSED_LENGTH SENSOR_SHUTDOWN PIXCLK_FREQ SIMUL_REG_FRAMEGRAB DETECT_FRAME_SIZE BITS_PER_CLOCK CLOCKS_PER_PIXEL RX_TYPE RX_PHY_SELECT RX_LANES RX_WIDTH RX_BIT_DEPTH RX_MODE RX_CLASS RX_SYNC_CODE RX_EMBEDDED_DATA RX_VIRTUAL_CHANNEL RX_MSB_FIRST RX_CCIR656 RX_INTERLACED HDMI_MODE MEM_CAPTURE MEM_CAPTURE_CYCLE MEM_CAPTURE_PROGRESS MEM_CAPTURE_MB MEM_CAPTURE_TRIGGER STEREO_MODE GRABFRAME_TIMEOUT HW_FRAME_TIME LSB_ALIGNED NACK_RETRIES TRIGGER0_HIGH_WIDTH TRIGGER0_LOW_WIDTH TRIGGER1_HIGH_WIDTH TRIGGER1_LOW_WIDTH TRIGGER2_HIGH_WIDTH TRIGGER2_LOW_WIDTH TRIGGER OUTPUT_PORT PIXEL_PACK PARITY GPIO FAR_BROADCAST EXTCLK_FREQ RESET_IMAGE_FIFO MIDDLE_12 BITSLIP_PROCEDURE DESCRAM DESCRAM_RNO DESCRAM_REF_ROWS SPI_REG_ACCESS SHIP_TO_SPI |
|---|