Dev Kit Contents
Before you begin setting up the camera, please verify the components included in your particular kit. Please note that there are several types of kits.
Full Demo Kit contents
- Aptina development kit baseboard (Demo2X or Demo3)
- Aptina sensor headboard with lens
- USB cable (2.0 or 3.0)
- Dev Kit Quick-Start Guide (this document)
- Camera tripod
Headboard-only Demo Kit contents
- Aptina sensor headboard with lens
The kits listed above may contain optional auxiliary boards.
Note that you will have access to the User Guides once you install the DevSuite software; refer to section "Additional Applications and Resources" for details.
LC HDMI board
- Refer to its User Guide for connectivity instructions: HDMI_LC User Guide.pdf.
HSSAB board
- Refer to its User Guide for connectivity instructions: HSSAB User Guide.pdf.
Dev Kit Assembly
- Connect the headboard and baseboard via the 26-pin female connector located on the back of the baseboard and the 26-pin male header on the back of the sensor headboard.
- For a full demo kit, screw the mini-tripod into the tripod mounting block.
- For optional auxiliary boards, refer to their User Guide.
Caution: Do not connect the kit to your computer yet.
0 Comments