...
-output <C/H/Binary filename>
Specify the filename for the C output file. The next parameter will control if output is header file format or code block format. If not given, default is stdout.
-sdat < sdat or .xsdat file name >
Specify the sdat/xsdat files input. If this file is missing, the program will stop.
-format <C/H>
Specify the output format. "C" will instruct the program to create C language code block; "H" will cause the program to create C header file format. If this switch is missing, or in default case, Ini_2_C will produce header file format output.-sdat < sdat or .xsdat file name >
Specify the sdat/xsdat files input. If this file is missing, the program will stop
The output format, either H (header) format or C (source code) format, default is H format.
The output format is also adjusted by the platform switch.
-platform <FULL, MRVL, MTK, QRD, ROCK, SPRD, WIN >
Platform adjusted output fields, default is FULL.
Full Header format: {op, data width/bit, address space, reg address, bit mask, value).
Full C Source code format: function(data width/bit, address space, reg address, bit mask, value).
Spreadtrum Header format: {reg address, value} (write only).
Spreadtrum C Source code format: function(reg address, value).
Qualcomm Header format: {reg address, value, mask} (write only).
Qualcomm C Source code format: function(reg address, value, mask).
Qualcomm mask can be omitted.
Marvell Header format: {reg address, value, 1 or 2 bytes} (write only).
Marvell C Source code format: function(reg address, value, 1 or 2 bytes).
MTK Header format: {reg address, value, 1 or 2 bytes} (write only).
MTK C Source code format: function(reg address, value, 1 or 2 bytes).
Rockchip Header format: {8 or 16 bits, reg address, value} (write only).
ROckchip C Source code format: function(8 or 16 bits, reg address, value).
Windows Header format: {reg address, value, Length, Delay} (write only).
Windows C Source code format: function(reg address, value, Length, Delay).
-verbose
The program will output excessive message to output, including all presets and line inforamtion. Default is not to output debuging messages.
...
The program adds the sip_addr to the binary configuration. This is a compulsory input parameter when binary output is required. There Default is no default0x6C.
-help
Gives usage of the tool.