This document describes the sample code that is included in the SDK and can be found in C:\Aptina Imaging\samples.

They use VS2015, and Qt 5.9.4 where applicable.  Also, for some samples VS2008/VS2010/VS2012/VS2013 solutions files are available.

NOTE: for Qt applications, you'll need to install Qt's VS2015 plugin and then in VS2015 set the following "Qt Versions" via the "Qt VS Tools" menu;

• Name "msvc2015_64" and path to 64-bit Qt (e.g C:\Qt\Qt5.9.4\5.9.4\msvc2015_64)
• Name "msvc2015" and path to 32-bit Qt (e.g. C:\Qt\Qt5.9.4\5.9.4\msvc2015)

Most pre-built executables are in C:\Aptina Imaging.

Each application is noted as being Command Line-based, GUI-based, or a plug-in.

...

Also, the Python script "create_new_dlg.py" can be used to make a copy of the BlankQtDlg source into the DevWare directory, while making all necessary file name changes and string substitutions to create a new plug-in project.

NOTE: for Qt applications, ensure that you have a System Variable of "QTDIR" set to the location of your Qt installation files; for example, C:\Qt\Qt5.4.0\5.4\msvc2012_opengl

Csharp_ApBase_COM_Sample

Csharp_ApBaseCOM.exe is a Command Line based C# sample of using ApBase's COM interface built using Visual Studio C#. The sample performs the following actions:
1. Starts ApBase_COM and then displays the sensor name found.
2. Loads the default initialization preset.
3. Sets up the capture/save parameters.
4. Grab the frame and saves it, and verifies there were no errors.
5. Exits ApBase_COM.

Please refer to the "ApBase COM Development Guide" document for usage details, found via:
start->All Programs->Aptina Imaging->Docs->Development Guides->ApBase COM Development Guide

Csharp_sample

Csharp_Samples.exe is a Command Line based C# sample of using DevSuite's COM interface built using Visual Studio C#. The sample expects an A-2020SOC sensor to be connected, and performs the following actions:
1. Starts DevWare and then verifies that a SOC2020 is connected.
2. Loads the default initialization preset.
3. Verifies that the sensor is outputting valid frames.
4. Captures a default image.
5. Adjusts AE exposure via a FW variable.
6. Captures the adjusted image.
7. Exits DevWare.
Please refer to the DevWare COM Interface document for usage details

DialogDll

This is a sample Devware Plugin Dialog which is built using Visual Studio C++, using MFC for the GUI implementation. The plugin demonstrates how to modify sensor registers, general registers and interact with image data. Please refer to the DevWare Plugin Development Guide document for more information on developing Devware Plugins. Note that the DLL must reside in the C:\Aptina Imaging\Plugins directory.

...

Simple is a GUI-based QT Visual Studio C++ ApBase application that can display image output for all Aptina sensors. It has a very simple demosaic algorithm in order to display output for Bayer only parts. It also includes examples of how to read and write registers.
Note that the application expects the width and height to match the SDAT's values of "Width" and "Height".

NOTE: for Qt applications, ensure that you have a System Variable of "QTDIR" set to the location of your Qt installation files; for example, C:\Qt\Qt5.4.0\5.4\msvc2012_opengl

TransportDLL

TransportDLL is a sample Visual Studio C++ transport DLL. A transport DLL allows a user to use non-Aptina Hardware to run with Devware or any other MIDLIB application. For more information on creating a transportDLL please refer to the "Transport DLL Development Guide"