Page Comparison

...

1. Navigate to the vendor-specific sub-folder in “\aptina imaging\apps_data\Serdes”.

2. Copy “SERDES_template.cdat” to the “board_data” folder under the installation folder.

   1. This file can be renamed, but the starting portion of “SERDES_” must be maintained as-is.

3. Edit that .cdat file as described in the header and by following the examples for registers and bit-fields.

4. Start DevWareX and Detect or load the sensor SDAT file.

5. Enable the Register dialog, use the “Page:” pull-down to select the “CHIPNAME” as defined in the CDAT.

...